How to clean gold jewelry:
1. Before cleaning, prepare first baby soap, soft cloth, soft brush and two bowls of warm water. Pour a few drops of baby soap into a bowl of warm water. Stir until the soap mixes with water flat. Then, soak them in soapy water for about 10 minutes.
2. To get rid of dirt that comes on the sidelines of the jewelry, after soaked 10 minutes, brush with a soft bristle brush. Clean in detail and make sure no more dirt comes.
2. To get rid of dirt that comes on the sidelines of the jewelry, after soaked 10 minutes, brush with a soft bristle brush. Clean in detail and make sure no more dirt comes.
3. After brushing, dip-dip the jewelry into another bowl of warm water. Do dipping several times to make dirt disappear and soap to clean the rest of the stick.
4. After the dyed-dye, make sure absolutely no residual soap and dirt. Then dry with a soft fabric cloth, and winds. Once completely dry, would be more glowing.
4. After the dyed-dye, make sure absolutely no residual soap and dirt. Then dry with a soft fabric cloth, and winds. Once completely dry, would be more glowing.
How to treat the right:
1.Clean often your silver and gold jewelry. Use a cloth and abrasive materials such as autosol are sold in supermarkets or often at a motorcycle repair shop. Wipe using a soft and nice of the former cotton shirt or cotton that has been frequently washed. Cotton, but scrubbing can also be rather difficult.
2. Store in cloth bags before entering the cabinet, or leather bag. If there is silica gel which is easily available in supermarkets are also very good. Another place that is safe is a box of paper, plastic and metal.
3. Gold or silver if you have too scratch and you do not mind for a little shrinkage (same, goldsmith was serviced to shrinkage) use sandpaper no. 1000 when it's fine to use fine sandpaper No. 2000 to be an occasional dip in the water. If thats enough to use just fine autosol had to make cling again. If not cling amplasan means less. This is called polishing. This method can not be done for plated items due to lead plating layer is lost.
1.Clean often your silver and gold jewelry. Use a cloth and abrasive materials such as autosol are sold in supermarkets or often at a motorcycle repair shop. Wipe using a soft and nice of the former cotton shirt or cotton that has been frequently washed. Cotton, but scrubbing can also be rather difficult.
2. Store in cloth bags before entering the cabinet, or leather bag. If there is silica gel which is easily available in supermarkets are also very good. Another place that is safe is a box of paper, plastic and metal.
3. Gold or silver if you have too scratch and you do not mind for a little shrinkage (same, goldsmith was serviced to shrinkage) use sandpaper no. 1000 when it's fine to use fine sandpaper No. 2000 to be an occasional dip in the water. If thats enough to use just fine autosol had to make cling again. If not cling amplasan means less. This is called polishing. This method can not be done for plated items due to lead plating layer is lost.
4. Opaque gems. Actually opaque gems can also be rubbed in this way but it takes much longer depending on the level and type of gem buramnya.If diamonds do not try because this jewel of the world's loudest. Very special, so expensive. Actual ways of smoothing the same as its jewel is the process of polishing metal or sandpaper and rub like the way the above.
0 komentar:
Posting Komentar